Displays IP statistics for the switch CPU or for a particular VLAN (Virtual LAN).
name | Specifies a VLAN name. |
vrname | Specifies a VR or VRF. |
N/A.
This command only shows statistics of the CPU-handled packets. Not all packets are handled by the CPU.
If you do not specify a VR or VRF, the command applies to the current VR context.
The fields displayed in the show ipstats command are defined in the following tables.
Field | Definition |
---|---|
InReceives | Total number of incoming IP packets processed by the CPU. |
InUnicast | Total number of unicast IP packets processed by the CPU. |
InBcast | Total number of broadcast IP packets processed by the CPU. |
InMcast | Total number of multicast IP packets processed by the CPU. |
InHdrEr | Total number of packets with an IP Header Error forwarded to the CPU. |
Bad vers | Total number of packets with a version other than IPv4 in the IP version field. |
Bad chksum | Total number of packets with a bad IP checksum forwarded to the CPU. |
Short pkt | IP packets that are too short. |
Short hdr | IP packets with a header that is too short. |
Bad hdrlen | IP packets with a header length that is less than the length specified. |
Bad length | IP packets with a length less than that of the header. |
InDelivers | IP packets passed to upper layer protocols. |
Bad Proto | IP packets with unknown (not standard) upper layer protocol. |
OutRequest | IP packets sent from upper layers to the IP stack. |
OutDiscard | IP packets that are discarded due to lack of buffer space or the router interface being down, or broadcast packets with broadcast forwarding disabled. |
OutNoRoute | IP packets with no route to the destination. |
Forwards | ForwardOK and Fwd Err aggregate count. |
ForwardOK | Total number of IP packets forwarded correctly. |
Fwd Err | Total number of IP packets that cannot be forwarded. |
NoFwding | Aggregate number of IP packets not forwarded due to errors. |
Redirects | IP packets forwarded on the same network. |
No route | Not used. |
Bad TTL | IP packets with a bad time-to-live. |
Bad MC TTL | IP packets with a bad multicast time-to-live. |
Bad IPdest | IP packets with an address that does not comply with the IPv4 standard. |
Blackhole | IP packets with a destination that is a blackhole entry. |
Output err | Not used. This is the same as Fwd Err. |
MartianSrc | IP packets with an invalid source address. |
Field | Definition |
---|---|
OutResp | Echo replies sent from the CPU. |
OutError | Redirect from broadcast or multicast source addresses. |
InBadcode | Incoming ICMP (Internet Control Message Protocol) packets with an invalid CODE value. |
InTooshort | Incoming ICMP packets that are too short. |
Bad chksum | Incoming ICMP packets with checksum errors. |
In Badlen | Incoming ICMP packets with length errors. |
echo reply (In/Out): | ICMP “echo reply” packets that are received and transmitted. |
destination unreachable (In/Out): | ICMP packets with destination unreachable that are received and transmitted. |
port unreachable (In/Out): | ICMP packets with port unreachable that are received and transmitted. |
echo (In/Out): | ICMP echo packets that are received and transmitted. |
Field | Definition |
---|---|
Out Query | Number of IGMP (Internet Group Management Protocol) query messages sent by the router. |
Out Report | Number of reports sent on an active multicast route interface for reserved multicast addresses and for regular IGMP reports forwarded by the query router. |
Out Leave | Number of IGMP out leave messages forwarded for IP multicast router interfaces. |
In Query | Number of IGMP query messages received. |
In Report | Number of IGMP report messages received (mostly from hosts). |
In Leave | Number of IGMP leave messages received (mostly from hosts). |
In Error | Number of IGMP packets with bad header fields or checksum failures. |
Field | Definition |
---|---|
Packets IN/OUT | Total number of IP packets received or transmitted on a VLAN router interface. |
Octets IN/OUT | Total number of octets received or transmitted on a VLAN router interface. |
Mcast packets IN/OUT | Total number of multicast packets received or transmitted on a VLAN router interface. |
Bcast packets IN/OUT | Total number of broadcast packets received or transmitted on a VLAN router interface. |
Errors IN/OUT | Total number of IP packets with errors received or transmitted on a VLAN router interface. |
Discards IN/OUT | Total number of IP packets that cannot travel up to the CPU due to lack of buffer space. |
Unknown Protocols IN/OUT | Total number of IP packets with unknown upper layer protocols received by the router interface. |
The following example displays IP statistics for the VLAN "accounting":
show ipstats vlan accounting
This command was first available in ExtremeXOS 10.1.
The ipv4 keyword was added in ExtremeXOS 11.2.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.